BIBLIOGRAPHY

The bibliography lists publications referenced in the Guidelines. Additionally, there is a bibliography of supplementary literature for further information (e.g., on the construction of old roofs).

Aggerholm, S., & Grau, K. (2018). Bygningers energibehov (Energy Requirements in Buildings) (5th ed.) (SBi Guidelines 213). The Danish Building Research Institute, Aalborg University. 

The Danish Work Environment Authority. (2014a). Fald fra højden ved arbejde på tage (Falls From Height When Working on Roofs) (WEA Guidelines 2.4.2). The Danish Work Environment Authority.

The Danish Work Environment Authority. (2014b). Fald fra højden på byggepladser (Falls From Height When Working on Building Sites) (WEA Guidelines 2.4.1). The Danish Work Environment Authority. 

BAR. (2002). Oplægning af beton- og tegltagsten (Installing Concrete and Clay Roof Tiles). BAR.

BAR. (2009). Arbejde med isoleringsmaterialer (Working with Insulation Materials). BAR.

BAR. (2011a). Opstilling af gitterspær (Erection of Lattice Trusses). BAR.

BAR. (2011b). Opstilling af hanebåndsspær (montering af top på terræn A) (Erection of Attic Trusses – Installation of Ridge on Terrain A). BAR.

BAR. (2011c). Opstilling af hanebåndsspær (montering af top efter ophejsning B) (Erection of Attic Trusses – Installation of Ridge after Being Hoisted up B). BAR.

BAR. (2013). Fakta om oplægning af undertag – banevarer (Facts about Installing Roofing Underlayment – Roll Material). BAR.

BAR. (2015). Tækkearbejde (Thatching). BAR.

BAR. (2016). Montage af træelementer (Installing Wood-based Composite Slabs). BAR.

BFA (Branchefællesskabet for arbejdsmiljø i Bygge & Anlæg). (2017a). Montage af saksespær (Installing Scissor Trusses). BAR.

BFA. (2017b). Montage af bjælkespær (Installing Rafter Beams). BFA.

BFA. (2017c). Montage af bjælkespær med kiprem (Installing Rafter Beams with Ridge Plates). BFA.

BFA. (2018). Branchevejledning om tagdækning (Trade Association Guidelines on Roofing). BFA.

Betonelement-Foreningen v. Frøbert Jensen, J. (2018). Betonelementer – Del 1-4 (Concrete Slabs – Parts 1–4). Copenhagen. www.betonportal.dk 

Bonnerup, B., Jensen, B.C., & Plum, C.M. (2015). Stålkonstruktioner efter DS/EN 1993 (Steel Constructions According to DS/EN 1993). Praxis – Nyt Teknisk Forlag.

Brandt, E. (2013). Moisture in Buildings (2nd ed.) (SBi Guidelines 224). The Danish Building Research Institute, Aalborg University.

Brandt, E., & Faldager, I. (2015). Afløbsinstallationer – systemer og dimensionering (Wastewater Installations – Systems and Sizing) (SBi Guidelines 255). The Danish Building Research Institute, Aalborg University.

Byggeriets Udviklingsråd (BUR). (1985). Planlægning af driftsvenligt byggeri – en anvisning (Designing Buildings That Are Easy to Operate). Byggeriets Udviklingsråd (BUR). 

Byg-Erfa. (1997). Undertage – opbygning, materialer og projektering (Underlayment – Assembly, Materials, and Design). BYG-ERFA Erfaringsblad (27) 97 11 24. 

Byg-Erfa. (1998). Termisk brud i glas (Thermal Breakage in Glass). Byg-Erfa Erfaringsblad (31) 98 03 25.

Byg-Erfa. (2006). Træbaserede tagelementer – styring af fugtforhold fra fabrik til færdigt byggeri (Wood-based Composite Roofing Slabs – Controlling Moisture from Factory to Finished Building). BYG-ERFA Erfaringsblad (27) 06 06 30. 

Byg-Erfa. (2007). Undertage – diffusionstætte og diffusionsåbne (Vapour-impermeable and vapour-permeable roofing underlayment). BYG-ERFA Erfaringsblad (27) 07 06 29.

Byg-Erfa. (2008a). Græstørvstage – opbygning og vedligehold (Turfed Roofs – Structure and Maintenance). BYG-ERFA Erfaringsblad (27) 08 12 09.

Byg-Erfa. (2008b). Zinkbeklædte kviste (Zinc-Clad Dormers). BYG-ERFA Erfaringsblad (37) 08 06 26.

Byg-Erfa. (2013a). Bygningers lufttæthed – tæthedskrav, bygningsudformning og måling (Airtightness in Buildings – Tightness Standards, Building Design, and Measurement). BYG-ERFA Erfaringsblad (99) 13 12 29.

Byg-Erfa. (2013b). Tagkonstruktioner med lille hældning – ventilation og fugtforhold (Low-slope roof assemblies – ventilation and moisture issues). BYG-ERFA Erfaringsblad (27) 13 06 05.

Byg-Erfa. (2013c). Tagkonstruktioner med stor hældning – ventilation af tagrum, hanebåndslofter og skunkrum (High-Slope Roof Assemblies – Roof Space Ventilation, Attic Trusses, and Crawl Spaces). BYG-ERFA Erfaringsblad (27) 13 11 05.

Byg-Erfa. (2015a). Dampspærrer – monteringsdetaljer (Vapour Barriers – Installation Details). BYG-ERFA Erfaringsblad (39) 15 12 29.

Byg-Erfa. (2015b). Dampspærrematerialer og fugttransport – væg- og loftkonstruktioner (Vapour Barrier Materials and Moisture Transport – Wall and Ceiling Structures). BYG-ERFA Erfaringsblad (39) 15 12 28.

Byg-Erfa. (2015c). Frithængende undertage af banevarer – monteringsdetaljer (Freely Suspended Roll-Material Underlayment – Installation Details). BYG-ERFA Erfaringsblad (27) 15 12 27.

Byg-Erfa. (2016a). Lufttæthed i ældre bygninger – efter renovering og fornyelse (Airtightness in Older Buildings – After Renovation and Replacements). BYG-ERFA Erfaringsblad (99) 16 08 31.

Byg-Erfa. (2016b). Afdækning af formure – ved tilslutning til flade tage uden udhæng (Coping of Front Walls – Interconnections with Flat Roofs without Overhang). BYG-ERFA Erfaringsblad (27) 16 12 16.

Byg-Erfa. (2016c). Grønne tage – membraner, dræning, isolering, vækstlag, brandsikkerhed og vedligehold (Green Roofs – Membranes, Drainage, Insulation, Growing Media, Fire Safety, and Maintenance). BYG-ERFA Erfaringsblad (27) 16 12 17.

Byg-Erfa. (2018). To dampspærrer – ved nybyggeri og renovering (Two Vapour Barriers – For New Builds and Renovation). BYG-ERFA Erfaringsblad (39) 18 12 12.

Cornelius, T. (2015). Småhuse – styrke og stabilitet (Small Houses – Strength and Stability) (SBi Guidelines 254). Copenhagen the Danish Building Research Institute, Aalborg University.

DBI Fire and Security. (1998). Brandsikring af stråtage (Fire-Proofing Thatched Roofs) (3rd ed.) (Brandteknisk information 29). DBI.

DBI Fire and Security. (2007). Undertage – Sikring mod brand (Roofing Underlayment – Fire Safety) (DBI vejledning 36). DBI.

DBI Fire and Security. (2008). Varmt arbejde – Brandsikringsforanstaltninger, Planlægning og gennemførelse (Hot Work – Fire Protection Measures, Planning and Execution) (DBI Guidelines 10, Part 1). DBI.

DBI Fire and Security (2014). Gode & brandsikre tage – Vejledning om brandsikring ved renovering af tage (Sound and Fire-Safe Roofs – Guidelines on Fire Safety for Roof Renovation). DBI. www.brandsikretage.dk

Danish Standards. (1994). Clay roofing tiles for discontinuous laying – Flexural strength test (DS/EN 538:1994). Copenhagen.

Danish Standards. (1996). Zinc and zinc alloys – Specification for rolled flat products for building (DS/EN 988:1996). Copenhagen.

Danish Standards. (1999a). Sawn timber – Appearance grading of softwoods. Part 1: European spruces, firs, pines and Douglas firs (DS/EN 1611-1:1999). Copenhagen.

Danish Standards. (1999b). Flexible sheets for waterproofing. Part 1: Bitumen sheets for roof waterproofing – Determination of dimensional stability (DS/EN 1107-1:1999). Copenhagen.

Danish Standards. (1999c). Flexible sheets for waterproofing. Part 1: Bitumen sheets for roof waterproofing – Determination of tensile properties (DS/EN 12311-1:1999). Copenhagen.

Danish Standards. (1999d). Flexible sheets for waterproofing. Part 1: Bitumen sheets for roof waterproofing – Determination of peel resistance of joints (DS/EN 12316-1:1999). Copenhagen.

Danish Standards. (1999e). Flexible sheets for waterproofing. Part 1: Bitumen sheets for roof waterproofing – Determination of shear resistance of joints (DS/EN 12317-1:1999). Copenhagen.

Danish Standards. (1999f). Flexible sheets for waterproofing. Part 1: Bitumen sheets for roof waterproofing – Determination of tensile properties (DS/EN 12311-1:1999). Copenhagen.

Danish Standards. (2000a). Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of water vapour transmission properties (DS/EN 1931:2000). Copenhagen.

Danish Standards. (2000b). Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of watertightness (DS/EN 1928:2000). Copenhagen.

Danish Standards. (2001). Flexible sheets for waterproofing – Determination of dimensional stability – Part 2: Plastic and rubber sheets for roof waterproofing (DS/EN 1107-2:2001). Copenhagen.

Danish Standards. (2004a). Glass in Building – Insulating glass units – Part 1: Generalities, system description, rules for substitution, tolerances and visual quality (DS/EN 1279-1). Copenhagen.

Danish Standards. (2004b). Wood-based panels for use in construction – Characteristics, evaluation of conformity and marking
(DS/EN 13986:2004+A1:2015). Copenhagen.

Danish Standards. (2005a). Flexible sheets for waterproofing – Bitumen water vapour control layers – Definitions and characteristics (DS/EN 13970:2005) with (DS/EN 13970/A1:2007). Copenhagen.

Danish Standards. (2005c). Determination of the uplift resistance of installed clay or concrete tiles for roofing – Roof system test method (DS/EN 14437:2005). Copenhagen.

Danish Standards. (2006). Clay roofing tiles for discontinuous laying – Determination of physical characteristics – Part 1: Impermeability test (DS/EN 539-1:2006). Copenhagen.

Danish Standards. (2007a). Eurocode 1: Actions on structures – Parts 1-3: General actions – Snow loads (DS/EN 1991-1-3:2007) with supplement and national annex. Copenhagen.

Danish Standards. (2007b). Durability of wood and wood-based products – Preservative-treated solid wood – Part 1: Classification of preservative penetration and retention (DS/EN 351-1:2007). Copenhagen.

Danish Standards. (2007c). Eurocode 1: Actions on structure – Parts 1-4: General actions – Wind actions (DS/EN 1991-1-4:2007) with national annex. Copenhagen.

Danish Standards. (2007d). Eurocode 5: Design of timber structures – Part 1-1: General – General - Common rules and rules for buildings (DS/EN 1995-1-1 + AC:2007) with supplement and national annex. Copenhagen.

Danish Standards. (2007e). Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of resistance to root penetration (DS/EN 13948:2007). Copenhagen.

Danish Standards. (2008). Roofing products of metal sheet – Specification for self-supporting products of copper or zinc sheet (DS/EN 506:2008). Copenhagen.

Danish Standards. (2009a). Code of Practice for Sanitary Drainage (DS 432:2009) with (DS 432/Sup.1:2012). Copenhagen.

Danish Standards. (2009b). Timber structures – Prefabricated wall, floor and roof elements – Part 1: Requirements (DS/INF prEN 14732-1:2009). Copenhagen.

Danish Standards. (2010a). Flexible sheets for waterproofing – Determination of shear resistance of joints – Part 2: Plastic and rubber sheets for roof waterproofing (DS/EN 12317-2:2010). Copenhagen.

Danish Standards. (2010b). Glass in building – Insulating glass units – Part 5: Evaluation of conformity (DS/EN 1279-5 + A2:2010). Copenhagen.

Danish Standards. (2011a). Calculation of heat loss from buildings (DS 418:2011). Copenhagen.

Danish Standards. (2011b). Concrete roofing tiles and fittings for roof covering and wall cladding – Product specifications (DS/EN 490:2011+A1:2017). Copenhagen.

Danish Standards. (2011c). Concrete roofing tiles and fittings for roof covering and wall cladding – Test methods (DS/EN 491:2011). Copenhagen.

Danish Standards. (2011d). Slate and stone for discontinuous roofing and external cladding – Part 2: Methods of test for slate and carbonate slate (DS/EN 12326-2:2011). Copenhagen.

Danish Standards. (2011e). Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of flow resistance at elevated temperature (DS/EN 1110:2011). Copenhagen.

Danish Standards. (2012a). Test methods for external fire exposure to roofs (DS/CEN/TS 1187:2012). Copenhagen.

Danish Standards. (2012b). Clay roofing tiles for discontinuous laying – Determination of geometric characteristics (DS/EN 1024:2012). Copenhagen.

Danish Standards. (2012c). Fibre-cement profiled sheets and fittings – Product specification and test methods (DS/EN 494:2012+A1:2015). Copenhagen.

Danish Standards. (2012d). Fibre-cement slates and fittings – Product specification and test methods (DS/EN 492:2012+A2:2018). Copenhagen.

Danish Standards. (2012e). Test methods for external fire exposure to roof (DS/CEN/TS 1187:2012). Copenhagen.

Danish Standards. (2012f). Copper and copper alloys – Sheet and strip for building purpose (DS/EN 1172:2012). Copenhagen.

Danish Standards. (2013a). Hygrothermal performance of building components and building elements – Internal surface temperature to avoid critical surface humidity and interstitial condensation – Calculation methods (DS/EN ISO 13788:2013). Copenhagen.

Danish Standards. (2013b). Flexible sheets for waterproofing – Plastic and rubber vapour control layers. Definitions and characteristics (DS/EN 13984:2013). Copenhagen.

Danish Standards. (2013c). National Annex to Eurocode 1: Actions on structures – Part 1-1: General actions – Densities, self-weight, imposed loads for buildings (DS/EN 1991-1-1 DK NA:2013). Copenhagen.

Danish Standards. (2013d). Clay roofing tiles and fittings – Product definitions and specifications (DS/EN 1304:2013). Copenhagen.

Danish Standards. (2013e). Clay roofing tiles for discontinuous laying – Determination of physical characteristics – Part 2: Test for frost resistance (DS/EN 539-2:2013). Copenhagen.

Danish Standards. (2013f). Thermal insulating products for building applications – Determination of compression behaviour (DS/EN 826:2013). Copenhagen.

Danish Standards. (2013g). Thermal insulating products for building applications – Determination of tensile strength perpendicular to faces (DS/EN 1607:2013). Copenhagen.

Danish Standards. (2013h). Flexible sheets for waterproofing – Reinforced bitumen sheets for roof waterproofing – Definitions and characteristics (DS/EN 13707:2013). Copenhagen.

Danish Standards. (2013i). Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of flexibility at low temperature (DS/EN 1109:2013). Copenhagen.

Danish Standards. (2013j). Flexible sheets for waterproofing – Determination of foldability at low temperature – Part 5: Plastic and rubber sheets for roof waterproofing (DS/EN 495-5:2013). Copenhagen.

Danish Standards. (2013k). Flexible sheets for waterproofing – Determination of peel resistance of joints – Part 2: Plastic and rubber sheets for roof waterproofing (DS/EN 12316-2:2013). Copenhagen.

Danish Standards. (2013l). Flexible sheets for waterproofing – Plastic and rubber sheets for roof waterproofing – Definitions and characteristics (DS/EN 13956:2013). Copenhagen.

Danish Standards. (2013m). Self-supporting double skin metal faced insulating panels – Factory made products – Specifications (DS/EN 14509:2013). Copenhagen.

Danish Standards. (2013l). Clay roofing tiles and fittings – Product definitions and specifications (DS/EN 1304:2013). Copenhagen.

Danish Standards. (2014a). Flexible sheets for waterproofing – Definitions and characteristics of underlays – Part 1: Underlays for discontinuous roofing (DS/EN 13859-1:2014). Copenhagen.

Danish Standards. (2014b). Slate and stone for discontinuous roofing and external cladding – Part 1: Specifications for slate and carbonate slate (DS/EN 12326-1:2014). Copenhagen.

Danish Standards. (2014c). Roofing and cladding products from metal sheet – Specification for self-supporting of steel, aluminium or stainless-steel sheet – Part 1: Steel (DS/EN 508-1:2014). Copenhagen.

Danish Standards. (2014d). Construction products – Assessment of release of dangerous substances – Part 2: Horizontal dynamic surface leaching test (DS/CEN/TS 16637-2:2014). Copenhagen.

Danish Standards. (2014e). Prefabricated accessories for roofing – Individual rooflights of plastic – Product specification and test methods (DS/EN 1873:2014+A1:2016). Copenhagen.

Danish Standards. (2014f). External fire exposure of roofs and roof coverings – Extended application of test results from CEN/TS 1187 (DS/CEN/TS 16459:2014). Copenhagen.

Danish Standards. (2015a). Thermal performance of buildings – Determination of air permeability of buildings – Fan pressurization method (DS/EN ISO 9972:2015). Copenhagen.

Danish Standards. (2015b). Natural stone products – Slabs for cladding – Requirements (DS/EN 1469:2015). Copenhagen.

Danish Standards. (2016a). Hygrothermal performance of building materials and products – Determination of water vapour transmission properties – Cup method (DS/EN ISO 12572:2016). Copenhagen.

Danish Standards. (2016b). Fire classification of construction products and building element – Part 5: Classification using data from external fire exposure to roofs tests (DS/EN 13501-5:2016). Copenhagen.

Danish Standards. (2016c). Timber structures – Strength graded structural timber with rectangular cross section – Part 1: General requirements (DS/EN 14081-1:2016 +A1 (2019)). Copenhagen.

Danish Standards. (2016d). Fire classification of construction products and building elements – Part 5: Classification using data from external fire exposure to roofs tests (DS/EN 13501-5:2016). Copenhagen.

Danish Standards. (2017). Smoke and heat control systems – Part 2: Natural smoke and heat exhaust ventilators (DS/EN 12101-2:2017). Copenhagen.

Danish Standards. (2018). Glass in building – Insulating glass units – Part 6: Factory production control and periodic tests (DS/EN 1279-6:2018). Copenhagen.

Danish Standards. (2018a). Glass in building – Insulating glass units – Part 2: Long term test method and requirements for moisture penetration (DS/EN 1279-2:2018). Copenhagen.

Danish Standards. (2018b). Glass in building– Insulating glass units – Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances (DS/EN 1279-3:2018). Copenhagen.

Danish Standards. (2018c). Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts (DS/EN 1279-4:2018). Copenhagen.

The Danish Energy Agency. (2019). National Annex to Eurocode 5: Design of timber structures – Part 1-1: General – Common rules and rules for buildings (DS/EN 1995-1-1 DK NA:2019). Copenhagen.

de Place Hansen, E.J. (2009a). Etablering af tagboliger (Constructing Loft Dwellings) (SBi Guidelines 225). Copenhagen.

de Place Hansen, E.J. (2009b). Tagboliger – byggeteknik (Loft Dwellings – Construction Techniques) (SBi Guidelines 226). Copenhagen.

The Danish Energy Agency. (2015). National Annex to Eurocode 1: Actions on structures – Parts 1-4: General actions – Wind actions (DS/EN 1991-1-4 DK NA:2015). Copenhagen.

EOTA. (2013). Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes (ETAG 006). European Organization for Technical Approval (EOTA).

The Danish Enterprise and Construction Authority. (2010a). Er din bygning snesikker? (Is Your Building Snow Safe?). Copenhagen.

The Danish Enterprise and Construction Authority. (2010b). Hvordan rydder jeg mit tag for sne? (How Do I Clear Snow from my Roof?). Copenhagen.

The Danish Enterprise and Construction Authority. (2011). Forebyg sneskader på haller og store spær (The Prevention of Snow Damage to Halls and Large-Scale Timber Trusses). Copenhagen.

Glasindustrien. (2018). Glastag (Glass Roofs). Copenhagen.

Homb, A., Hveem, S., & Høilund-Kaupang, H. (2012). Lydmåling i laboratorium av vinduer, yttervegger, tak og ytterveggventiler (Acoustic Measurement of Windows, Exterior Walls, Roofs, and Exterior Wall Vents) (Projektrapport 102). SINTEF Byggforsk. www.sintefbok.no/Product.aspx?sectionId=65&productId=929&categoryId=16

Hovde, P.J., (2005). The Factor Method – a simple toll to service life estimation, [Conference presentation]. 10th Int. Conf. on Durability of Building Materials and Components, Lyon, France, Proc. TT4-115.

ISO. (2008). Buildings and constructed assets – Service life planning, Part 8: Reference service life and service-life estimation (ISO 15686-8:2008). International Standard Organization.

The Commission. (2000). Commission Decisions of 6 September 2000 implementing Council Directive 89/106/EEC as regards the external fire performance of roof coverings (2000/553/EC). Brussels.

Kragh, J., Nielsen, N.S., Aggerholm, S., & Kirkeskov, J. (2014). Anvisning om efterisolering af tagetage (Guidelines on Re-Insulating Top Floors). The Danish Building Research Institute, Aalborg University. www.efterisolering.sbi.dk

Munch-Andersen, J., & Pedersen, E.S. (2018). Dimensionering af glas i klimaskærmen (Sizing Glass in the Climate Envelope) (2nd ed.) (SBi Guidelines 215). The Danish Building Research Institute, Aalborg University.

MURO (Bricklayers’ Information Council). (2005). Oplægning af tegltage (Installing Clay-Tiled Roofs) (Tegl 36) [under revision]. Copenhagen.

Møller, E.B. (2012a). Efterisolering af småhuse – energibesparelser og planlægning (Re-Insulating Small Houses – Energy Savings and Planning) (SBi Guidelines 239). The Danish Building Research Institute, Aalborg University.

Møller, E.B., Brandt, E., & Pedersen, E.S. (2016). Småhuse – Klimaskærmen (Small Houses – The Climate Envelope (SBi Guidelines 267). The Danish Building Research Institute, Aalborg University.

Nordisk Træbeskyttelsesråd. (2002). Nordiska träskyddsklasser Del 1: Furu och andra lättimpregnerbara barrträslag (Scandinavian Wood-Protection Classes Part 1: Pine and Other Easily Impregnated Softwood Species) (NTR Document no. 1: 1998). Stockholm.

Plastindustrien. (2008). Tagkonstruktioner med udvendig isolering af EPS (Roof Assemblies with Exterior EPS Insulation). Copenhagen.

Rasmussen, B., & Petersen, C.M. (2014). Lydisolering af klimaskærmen (Sound Insulation of the Climate Envelope) (SBi Guidelines 244). The Danish Building Research Institute, Aalborg University.

Rasmussen, T.V., & Nicolajsen, A. (2013). Klimaskærmens lufttæthed (Airtightness of the Climate Envelope) (2nd ed.) (SBi Guidelines 214). The Danish Building Research Institute, Aalborg University.

Tarp, L. (2008). Tækkebogen – Materialer (Book of Thatching – Materials). Praxis – Erhvervskolernes Forlag.

The Danish Transport, Construction and Housing Authority. (2017). Bekendtgørelse af offentliggørelse af bygningsreglement 2018 (BR18) (Executive Order on the Building Regulations 2018 (BR18) (BEK no. 1615 of 13/12/2017) with (BEK no. 606 of 29/05/2018). Copenhagen.

The Danish Transport, Construction and Housing Authority. (2018a). Guidelines of the Building Regulations on energy consumption. Copenhagen. www.bygningsreglementet.dk

The Danish Transport, Construction and Housing Authority. (2018b). Bilag 1 – Præ-accepterede løsninger – Enfamiliehuse (Annex 1 – Pre-Accepted Solutions – Single-Family Dwellings). Copenhagen. www.bygningsreglementet.dk

The Danish Transport, Construction and Housing Authority. (2018c). Bygningsreglementets vejledning om fugt og vådrum (Building Regulations Guidelines for Moisture and Wet Rooms). Copenhagen. www.bygningsreglementet.dk

The Danish Transport, Construction and Housing Authority. (2018d) Bygningsreglementets vejledning om glaspartier, glasflader og værn af glas i bygninger (Building Regulations Guidelines on Glazing, Glass Surfaces and Guard Railings). Copenhagen. www.bygningsreglementet.dk

The Danish Transport, Construction and Housing Authority. (2018e). Bygningsreglementets vejledning til kapitel 5 – brand (Guidelines in the Building Regulations for Chapter 5 – Fire). Copenhagen. www.bygningsreglementet.dk

The Danish Transport, Construction and Housing Authorirty. (2019). Ofte rentable konstruktioner – Vejledning til bygningsreglementet (Guidelines of the Building Regulation on Assemblies Likely to be Financially Viable) (version 3). Copenhagen.

Træinformation. (2009a). Træspær 1 – Spær med hulplader (Timber Roof Trusses 21– Roof Trusses with Metal Gusset Plates) (TRÆ 58). Lyngby.

Træinformation. (2009b). Træspær 2 – Valg, opstilling og afstivning (Timber Roof Trusses 2 – Choice, Construction, and Bracing) (TRÆ 58). Lyngby.

Træinformation. (2010). Brancheaftale om træbaserede plader (Trade Association Agreement on Wood-based Sheets). Lyngby.

Træinformation. (2011a). Brancheaftale om taglægter 2011 (Trade Association Agreement on Roof Battens 2011). Lyngby.

Træinformation. (2011b). Taglægter (Roof Battens) (TRÆ 65). Lyngby.

Træinformation. (2012). Træplader (Wood Sheets) (TRÆ 60). Lyngby.

Træinformation. (2013). Undertage (Roofing Underlayment) (2nd ed.) (TRÆ 67). Lyngby.

Træinformation. (2015a). Beregning af tagåse – Beregningsforudsætninger og brugervejledning til programmet ÅseDim (Calculating Timber Purlins – Calculation Basis and User Instructions for the Program ÅseDim) (TRÆ-rapport nr. 05). Lyngby.

Træinformation. (2015b). Faste undertage og tagunderlag – Baggrund for dimensioneringstabeller (Firm Roofing Substrates – Basis for Dimensioning Tables) (TRÆ-rapport no. 09). Lyngby.

Træinformation. (2016). Beregning af trækonstruktioner (Calculating Timber Constructions). Lyngby.

Træinformation. (2017). Tagkonstruktioner med store spær (Roof Assemblies Using Large-Scale Rafters) (TRÆ 73). Lyngby.

Træinformation. (2018). TRÆdim-serien – beregningsprogrammer for dimensionering af træbaserede konstruktioner baseret på Eurocodes og gældende nationale annex’er (The TRÆdim Series – Calculation Programs for Wood-based StructuresBbased on Eurocodes and Applicable National Annexes). Lyngby.

Tækkelauget. (2019). Veludført stråtag – Branchevejledning – det tekniske grundlag for at planlægge og udføre korrekt tækkearbejde (A Thatched Roof Well Executed – Trade Association Guidelines – A Technical Basis for Planning and Executing Correct Coatwork) (6th ed.). Copenhagen.

Aagaard, N.J., Møller, E.B., & de Place Hansen, E.J. (2012). Levetider for bygningsdele omfattet af ejerskifteforsikring og huseftersynsordningen (Lifespans for Building Parts Covered by Change-of-Ownership Insurance and the House Inspection Scheme) (SBi 2012:05). The Danish Building Research Institute, Aalborg University.

Aalund, F. (2012). Inddækning i tegltage (Flashings in Clay-Tiled Roofs) (Information om bygningsbevaring, Section 4.3). The Danish Agency for Culture (now the Agency for Palaces and Culture). www.slks.dk/bygningsfredning/information-om-bygningsbevaring

Aalund, F., & Vadstrup, S. (2012). Undertage til tegltage (Roofing Underlayment for Clay-Tiled Roofs) (Information om bygningsbevaring, Section 4.4). The Danish Agency for Culture (now the Agency for Palaces and Culture). slks.dk/bygningsfredning/information-om-bygningsbevaring

BAR. (2009). Branchevejledning om Arbejde med isoleringsmaterialer (Trade Association Guidelines on Work with Insulation Materials). BFA, Branchefællesskabet for arbejdsmiljø i Bygge & Anlæg.

Berin, P., & Vadstrup, S. (2012). Metaltage (Metal Roofs) (Information om bygningsbevaring, Section 4.9). The Danish Agency for Culture (now the Agency for Palaces and Culture). slks.dk/bygningsfredning/information-om-bygningsbevaring

Birkeland, Ø. (1974). Tak – ytelsesbeskrivelse (Roofs – Performance Descriptions) (Guidelines No. 6). Norges Byggforskningsinstitutt.

Bjerking, S., & Bjerking, B. (1991). Skador på hus – vad gör man?: Yttertak & balkonger (House Damage – What to Do?: Roofs and Balconies). Statens råd för byggnadsforskning.

Brandt, E., & Hansen, M.H. (1998). Undersøgelser af uventilerede undertage (Investigations of Unvented Roofing Underlayment) (SBI report 292). The Danish Building Research Institute.

Byggeskadefonden vedrørende Bygningsfornyelse (BvB). (2005). Gode tage – din genvej til god tagrenovering, Vejledning – Temahæfte (Good Roofs – Shortcuts to Good Roof Renovation – Focus Leaflet). Copenhagen. www.godetage.dk

Center for Bygningsbevaring. (2010). Maling med trætjære og trætjærefarve (Painting with Wood Tar and Wood Tar Paint). Raadvad.

DBI Fire and Safety. (2009). Glas og brand. Brandbeskyttende glas i bygningsdele (Glass and Fire. Fire-Protective Glass in Building Parts). (Brandteknisk vejledning 37). Copenhagen.

de Place Hansen, E.J. et al. (2015). Småhuse – indretning og funktion (Small Houses – Layout and Function) (SBi Guidelines 253). The Danish Building Research Institute, Aalborg University.

Dreier, C. et al. (1985). Glasstak. Konstruksjoner. Klimapåvirkninger og løsninger for nordiske forhold (Glass Roofs. Structures. Climate Impact and Solutions for Scandinavian Conditions) (2nd ed.) (NBI Håndbok 36). Norges Byggforskningsinstitutt.

E. Nielsens Mekaniske Stenhuggeri. (2019). Naturskifer til tag og facadebeklædning (Natural Slate for Roof and Facade Cladding). Hvidovre.

Eggan, K., Haugerud, O., Jacklin, V., Madsen, A., & Mellem, H. (2015). God praksis for legging av membraner med banebelegg (Projektering- og udførelsesvejledning) (Installing Roofing Membranes – Best Practice) (Design and Installation Manual). Takentreprenørenes Forening (TEF).

EOTA. (1999). Assumption of working life of construction products in Guidelines for European Technical Approval, European Technical Approvals and Harmonized Standards (Guidance Document 002). European Organization for Technical Approval (EOTA).

Erhvervsskolernes Forlag. (2010). Tagkonstruktioner (Roof Assemblies) (6th ed.). Odense.

Grundejernes Investeringsfond. (2011). Copenhagen. www.levetider.dk

Hansen, M.H., Haugbølle, K., & Brandt, E. (2003). Levetidsmodellering for bygningsdele (Forecasting Service Life Expectancy of Building Parts [Unpublished, ed.]. The Danish Building Research Institute.

HAPM (Housing Association Property Mutual). (1998). HAPM Component Life Manual. HAPM Publications.

Harrison, H.W. (1996). Roofs and roofing: Performance, diagnosis, maintenance, repair and the avoidance of defects (3rd. ed.). Pennsylvania State University: Building Research Establishment. 

Hyllestad, N. (2012). Beklædning med træspån (Wood-Shingle Cladding) (Information om bygningsbevaring, Section 4.11). The Danish Agency for Culture (now the Agency for Palaces and Culture). slks.dk/bygningsfredning/information-om-bygningsbevaring/

Hyllestad, N. (2012). Tagpap (Bituminous Felt) (Information om bygningsbevaring, Section 4.10). The Danish Agency for Culture (now the Agency for Palaces and Culture). slks.dk/bygningsfredning/information-om-bygningsbevaring

IEMB. (2009). Lebensdauer von Bauteilen und Bauteilschichten (Service Life of Building Parts and Component Layers) (InfoBlatt No. 4.2). Institut für Erhaltung und Modernisierung von Bauwerken e.V. an der TU Berlin.

International Standard Organization (ISO). (2006). Buildings and constructed assets – Service life planning – Part 7: Performance evaluation for feedback of service life data from practice (ISO 15686-7:2008). Geneve.

International Standard Organization (ISO). (2011). Buildings and constructed assets – Service life planning – Part 1: General principles and framework (ISO 15686-1:2011). Geneve.

Kjærsgaard, P. (ed.) (1948). Byggebogen – BB 348.0 tagdækning. alment. (Building Book – BB 348.0 Roofing. General). Nyt Nordisk Forlag.

Kjærsgaard, P. (ed.) (1949). Byggebogen – BB 348.42 zinktag. (Building Book – BB 348.42 Zinc Roofs). Nyt Nordisk Forlag.

Kjærsgaard, P. (ed.) (1950). Byggebogen – BB 348.41 kobbertag (Building Book – BB 348.41 Copper Roofs). Nyt Nordisk Forlag.

Kjærsgaard, P. (ed.) (1971). Byggebogen – BB 348.22 asbestcement – skifertag (Building Book – BB 348.22 Asbestos Cement – Slate Roofs). Nyt Nordisk Forlag.

Larsen, N., & Vadstrup, S. (2012). Vedligeholdelse af stråtage (Maintenance of Thatched Roofs) (Information om bygningsbevaring, afsnit 4.6). The Danish Agency for Culture (now the Agency for Palaces and Culture).  slks.dk/bygningsfredning/information-om-bygningsbevaring

Mellem, H., Jacklin, V., Haugerud, O., Rustand, M., & Eggan, K. (2013). God praksis for tekking med banebelegg (Tiled Roofs – Best Practice). Takentreprenørenes Forening (TEF).

Moser, K. (1999). Towards the practical evaluation of service life – illustrative application of the probabilistic approach. Proc. of 8th Int. Conf. on Durability of Building Materials and Components, (Ed.: M.A. Lacasse and D.J. Vanier), Institute for Research in Construction, Ottawa, Canada, pp. 1319-1329.

Nielsen, A., & Claesson, J. (2011). Snow Melting and Freezing on Older Townhouses. Proceedings of the 9th Nordic Symposium on Building Physics: NSB 2011. bind 1, Tampere University Press, Tampere, Finland.

Nielsen, A. (2005). Snow, Ice and Icicles on Roofs – Physics and Risks. Sixth Nordic Conference on Building Physics in the Nordic Countries, Reykjavik.

Plandirektoratet & Boligstøttekontoret. (1999). Naturskifer. Byfornyelsen I Københavns Kommune forskrifter for materialer, udførelse og kvalitetssikring (Natural Slate. Urban Renewal in the City of Copenhagen, Materials, Installation, and Quality Assurance Specifications). Copenhagen.

Vadstrup, S., & Andreasen, J. (2012). Skifertage (Slate Roofs) (Information om bygningsbevaring, Section 4.8). The Danish Agency for Culture (now the Agency for Palaces and Culture). slks.dk/bygningsfredning/information-om-bygningsbevaring

Varming, J.C. (2012). Tegltage med vingetagsten (Pantiled Roofs) (Information om bygningsbevaring, Section 4.2). The Danish Agency for Culture (now the Agency for Palaces and Culture). slks.dk/bygningsfredning/information-om-bygningsbevaring

Asfalttakbelegg. egenskaper og tekking (Bituminous Felt. Properties and Installation) (Anvisning No. 544.203). 

Bånd- og skivetekking med falsede tynnplater (Strip and Sheet Roofing with Seamed Sheets) (Anvisning No. 544.221)

Isolerte skrå tretak med kombinert undertak og vindsperre (Insulated Sloping Timber Roofs with Combined Roofing Underlayment and Wind Barrier) (Anvisning No. 525.102)

Kompakte tak (Compact Roofs) (Anvisning No. 525.207)

Mekanisk innfestning av asfalttakbelegg og takfolie på skrå og flate tak (Mechanical Fixing of Bituminous Felt and Roofing Foil on Sloping and Flat Roofs) (Anvisning No. 544.206)

Metaller til bygningsbruk. typer og egenskaper (Metals for Construction. Types and Properties) (Anvisning No. 571.403)

Sedumtak (Sedum Roofs) (Anvisning No. 544.823)

Skader på profilerte takplater og båndtekning. årsaker og utbedringsmåter (Damage to Profiled Roofing Sheets and Strip Roofing. Causes and Repair) (Anvisning No. 744.202)

Skrå tretak med kaldt loft (Sloping Cold Timber Roofs) (Anvisning No. 525.106)

Skrå tretak med oppholdsrom på deler av loftet (Sloping Timber Roof, Partially Utilised for Accommodation) (Anvisning No. 525.107)

Takfolie. Egenskaper og tekking (Roofing Foil. Properties and Installation) (Anvisning No. 544.202)

Takkonstruksjoner. Valg av taktype og konstruksjonsprinsipp (Roof Assemblies. Choice or Roof and Structure) (Anvisning No. 525.002)

Takrenner og nedløpsrør (Gutters and Downpipes) (Anvisning No. 525.921)

Tak tekket med takfolie eller asfalttakbelegg. vedlikehold, utbedring og omtekking (Roofing Foil or Bituminous Felt Covering. Maintenance, Repair, and Replacement) (Anvisning No. 744.201)

Taktekking av tegl- og betongtakstein, skifer, bordtak, kavletak og takspon på eldre bygninger (Roof Coverings of Clay or Concrete Tiles, Roof Boards, Slate, Logs, and Roofing Shingle in Old Buildings) (Anvisning No. 744.103)

Taktekking. Bånd- og skivetekking med falsede tynnplater (Roof Covering. Strip and Sheet Roofing with Seamed Sheets) (Anvisning No. 544.221)

Takvinduer i skrå, isolerte, luftede tretak (Roof Lights in Sloping, Insulated, Vented Timber Roof Assemblies) (Anvisning No. 525.777) 

Tekking av tak med bord (Roof Covering with Roof Boards) (Anvisning No. 544.106)

Tekking av tak med treshingel (Roof Covering with Wood Shingles) (Anvisning No. 544.107)

Tekking med asfalttakbelegg eller takfolie. Detaljløsninger (Roof Covering with Bituminous Felt or Roofing Foil. Detail Solutions) Anvisning No. 544.204)

Tekking med asfalttakshingel (Roof Covering with Bituminous Shingles) (Anvisning No. 544.105)

Tekking med profilerte metalplater (Anvisning No. 544.103)

Tekking med takskifer (Anvisning No. 544.102)

Tekking med takstein. materialer, legging og forankring (Anvisning No. 544.101 Del 1)

Torvtak (Anvisning No. 544.803)

Undertak (Anvisning No. 525.866)

Utbedring og omlegging av overlappstekning (Anvisning No. 744.105 Del 1)